EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Cost Controller is a very productive photo voltaic controller created for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Vitality conversion and technique security for a variety of photovoltaic (PV) purposes.
Key Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller engineering for excellent photo voltaic Strength harvesting. Critical capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Improved battery existence.
Liquid crystal display Exhibit with serious-time knowledge monitoring.
A number of Load Regulate Modes together with handbook and timer.
In depth Digital Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Step Guide to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN unit, temperature sensor, communication cables, and user guide.
Confirm the design amount and voltage scores match your solar panel and battery requirements.
2. Mounting the Cost Controller
Decide on a very well-ventilated, dry site near to the battery financial institution.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain right clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Caution: Generally observe suitable security protocols and ensure the procedure is run off right before connecting parts.
Phase 1: Join the battery terminals to your cost controller (optimistic to good, destructive to detrimental).
Phase 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Hook up the load terminals if utilizing a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power about the controller by connecting the battery initial.
Utilize the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Manage.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time monitoring using the MT50 distant meter.
Details could be logged by way of the RS485 communication port working with application like Photo voltaic Station Computer.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Prevalent Concerns
Difficulty 1: No Power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Safety
Validate the solar array’s voltage ranking.
Modify process parameters if needed.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT settings from the menu.
Great things about the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification technology makes certain:
Increased Effectiveness: Lowered Power losses all through conversion.
Improved Trustworthiness: Steady general performance underneath variable loads.
Longer Battery Existence: Consistent and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technological innovation is an Extraordinary option for optimizing solar power technology and extending battery lifetime. By subsequent the above mentioned set up manual, end users Read more can make sure optimum performance and method longevity.